I am thinking about building this engine for this hull project. I have built an Oscillator for it but to me it just looks wrong.
Malcolm or anybody else what do you think?
Hull is 45" bow to stern with a 12" beam. It is very flat at the stern and sits on the water.
Suggestions welcome.

I have had some great feedback from Malcolm what a helpful chap.I will keep forum users informed of progress when I make a start.

What's a MB 22 engine, do you have a pic?

You will find plans on the download section.

Thanks.

Making some progress.

Almost at the finish line a few little jubs to do.

Running on air
http://www.youtube.com/watch?v=h8Ic3crLofY&feature=youtu.be.
No seals , a very off centre fly wheel but it runs

The intended launch for the engine.

The finished engine a big thank you to Malcolm for all his help.
http://www.youtube.com/watch?v=7PtxuljcltM

Just added a few coats of varnish, think I will leave the hull without a coat of white now.

Other than one or more small leaks this is the engine running on steam.
https://www.youtube.com/watch?v=1oxlIzebLXY

Mark, just thought you might like to see how a standard (3/8 x 3/8) MB 22 runs. This is in a River Queen - 36" long and weighs about 14 lb. 2.25 dia prop about 3.5" pitch. Driving through a fwd/neutral/rev gearbox.

www.youtube.com/watch?v=RnY-K0ap_1o

Malcolm