Ah, the thread has come out of hibernation. I redid the rudder cabling but sorry that I have not posted here. The springs were not the answer as they are used for some other rigging on the model. I set the boat aside for a while to complete a Moonraker and a Seabex One. Once they are finished, back to the DQ but please keep the thread going.

Until next time,

IR3

I am Back! After a hiatus AND 3 funerals I have decided to resume building the DELTA QUEEN.
First I cleaned the 7 foot dinning room table and placed the boat on it. Now I am reading this forum to remind how to build boats.
My next job is to see what is missing and to proceed finishing my boat

Welcome back. 

Kurlander, welcome back! It will be a great joy to finish your boat and then navigate your sternwheeler on a pond like I with my "Ville des Bruges".

Thomas

Thank you Kurlander and IR3 for the detailed and informative build logs on the paddle wheeler. As I am building a part model of such a vessel the information on the paddle itself is very interesting to me and will help a lot when I get to that part to build.
Robert

Welcome back!