Steam engine

[Dallinson]

Gentlemen.

If anyone is planning to build a real steam driven paddle ship, then I would
like to make you aware of an engine and paddle set which is available as a
set of castings.
The engine has twin 3/4 inch bore cylinders X 1.5 inch stroke and Stephenson
valve gear.
Dimensions given are 6.5 inches high by (minimum) 14 inches wide by 10.5
inches long.
The paddles are included and are fully feathering.
There are 50 gun metal castings in the set. All other materials you have to
source yourself.
The total cost for drawings and castings is approx Pds150.
They also offer a suitable boiler.
The supplier is Reeves 2000. They are mostly train orientated but offer a
wide range of other models. Click onto "stationary engines", you will see
the diagonal paddle engine about 4 or 5 down from the top.
A.J.Reeves &co (Birmingham) Ltd
Appleby Hill
Austrey
North Warwickshire
CV9 3ER
England
Tel 01827 830894
Fax 01827 830631

www.AJReeves.com

Usual disclaimer. I have no connection whatsoever with this Company. I am
simply passing along what I think might be of interest to the group.
It would make quite an impressive ship!!!!

All the best.
David, in sunny Spain.