My new Paddlewheels

[Propkiller]

My Paddlewheels for my Lulonga Project in Scale 1:25

Greets Jörg

[Propkiller]

I forgot,the Material is Fibreglass 2mm Diameter 27cm CNC Cut from a Friend.

[Eddy Matthews]

That's superb Jörg, I'm really looking forward to seeing this monster at our Paddler Day.....

You seem to go from one extreme to the other.... From the tiny little models that you showed us last year, to this leviathon! ( I hope that translates into German okay? )

Please keep us informed of your progress, I'm sure a lot of our members will be interested!

Regards
Eddy

[Propkiller]

Ok one Pic of the Beginning but the rest in September Its realy a Monster uh 1,4 meters long

[Eddy Matthews]

I know the Lulonga is huge, but the glider is even bigger!!! I dread to think what wingspan that is!!

Regards
Eddy

[Propkiller]

I know the Lulonga is huge, but the glider is even bigger!!! I dread to think what wingspan that is!!

Regards
Eddy

Hi Eddy
The wingspan is 4,35meters its a Ka4 Rhönlerche 33% Scale.The original flys in the late 1950s,my one next Year.Complete Balsa built
Its not my Biggest Glider


Jörg

[scotfriend]

Hi Jörg,

 i like to see you carring your model to the pond and launch it alone

Is it necessary to extend my van, please let me know before he is painted

[Eddy Matthews]

Is it necessary to extend my van, please let me know before he is painted

Just put some extra paddlewheels on the front of the Lulonga and tow it behind the van Hans

Eddy

[Propkiller]

Ok lets make 4Wheel Drive and i Pull the Transit

[scotfriend]

You need six wheels Joerg,

two at the front and four at  the back, otherwise you cant pull my van

[Eddy Matthews]

There are only 9 weeks to go until the Paddler Day Joerg, so you'll be rushing as much as I am with the Sir William Wallace trying to get the model finished in time!!

My model definitely wont be complete, but it will be sailing - I can add the final detail stuff later.... There's just too much to do, and not enough time

Regards
Eddy

[Propkiller]

Hi Eddy

I now the Problem,but strong Building and my Ship gets ready.Some small Details come later.I hope i can drive at the next weekend than come the Finish(i hate Painting) and Details.

Jörg

[Propkiller]

The next step.

[Eddy Matthews]

It's looking good Joerg..... I'm just waiting to see the two brushless motors that will power it - Those twin rooster tails will look great! 

Eddy

[Propkiller]

I favorite this Engine 541cu Cadillac(Soft Running and Power)