Padleducks logo Paddleducks name

Welcome to Paddleducks..... The home of paddle steamer modelling enthusiasts from around the world.



+-

Main Menu
Home
About Us
Forum
Photo Gallery
Links
Contact Us

UserBox
Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

Search


Advanced Search
« previous next »
Pages: [1] |   Go Down

Author Topic: Ships Wheel?  (Read 5466 times)

Offline Eddy Matthews

  • Administrator
  • Senior Member
  • *****
  • Posts: 5042
  • Gender: Male
Ships Wheel?
« on: January 06, 2006, 05:09:47 AM »
I have to make a fairly large diameter ships wheel for the pilot house/bridge of my model of the Suter. That's the wheel used for steering, NOT the paddlewheel....

Has anyone made anything like that and could give some tips? The one I need to make is approximately 4" in diameter. I've searched the normal suppliers, but no-one seems to manufacture anything that large, so I'm stuck with making my own..... HELP! :-)
Logged
~ Never, ever, argue with an idiot. They'll drag you down to their level and beat you with experience ~

SSMA Bruce

  • Guest
Ships Wheel?
« Reply #1 on: January 06, 2006, 05:11:45 AM »
how big, how many spokes, how many grips?  Usually, spokes = grips.
Logged

Offline Eddy Matthews

  • Administrator
  • Senior Member
  • *****
  • Posts: 5042
  • Gender: Male
Ships Wheel?
« Reply #2 on: January 06, 2006, 05:25:42 AM »
Quote from: "SSMA Bruce"
how big, how many spokes, how many grips?  Usually, spokes = grips.


Typical - I put all my modelling stuff away for christmas, and now that I want to find the drawings I can't!

Anyway, taking a rule to the pilothouse, it needs to be 4" in diameter, with approx 16-18 spokes/grips.
Logged
~ Never, ever, argue with an idiot. They'll drag you down to their level and beat you with experience ~

SSMA Bruce

  • Guest
Ships Wheel?
« Reply #3 on: January 06, 2006, 05:32:32 AM »
1-2 inches and I'd just draw it out on piece of sheet basswood, scroll saw it out, then needle file the curves and details.   At 4", I'd turn the spokes on a lathe and build it the same way they did in the day.  I'd still use basswood, though.  Tough one.  Scan and post it when you find your drawings.
Logged

Offline Eddy Matthews

  • Administrator
  • Senior Member
  • *****
  • Posts: 5042
  • Gender: Male
Ships Wheel?
« Reply #4 on: January 06, 2006, 05:42:25 AM »
Hooray! I found the drawings!

I've built to a different scale to the drawings, so please DON'T use them for dimensions! The wheel needs to be 4" in diameter from the tip to tip of the spoke/grips.
Logged
~ Never, ever, argue with an idiot. They'll drag you down to their level and beat you with experience ~

SSMA Bruce

  • Guest
Ships Wheel?
« Reply #5 on: January 06, 2006, 05:52:14 AM »
Yeah, this one is pretty straight forward.  I'd take a sheet of 1/4 inch basswood and draw the two rims at about 1/4 inch wide, plus the hub.  Before cutting, I'd mark out the spokes at one per 20 degrees.  I'd do it all by hand - no power tools.  Don't try to cut the rims/hub at the line, but just outside it.  sand it down to the line after cutting.  Use a pin vise to drill the majority of the spoke holes, then finish the rectangle with a file.  Turn the grips on the end of each spoke, or, use a round file to shape them by hand.  

Basswood is optional.  I think its soft enough to be easy to work, but hard enough to not be too fragile, once finished.  You can stain and finish to suit.
Logged

towboatjoe

  • Guest
Ships Wheel?
« Reply #6 on: January 06, 2006, 08:18:19 AM »
Here you go Eddy. I took your drawing and made a template for you to use. By the way the grips are at 20 degree increments if anyone was wondering.
Logged

Offline Eddy Matthews

  • Administrator
  • Senior Member
  • *****
  • Posts: 5042
  • Gender: Male
Ships Wheel?
« Reply #7 on: January 06, 2006, 09:42:33 AM »
Thanks Bruce and Joe - The help is greatly appreciated.
Logged
~ Never, ever, argue with an idiot. They'll drag you down to their level and beat you with experience ~
Pages: [1] |   Go Up
« previous next »
 
Powered by EzPortal