Hi All, Another photo of landing platform with handrails done, all soldered up.The gate moveable chain I shall have to get something with smaller links to finish it off. And put in the missing ones. Other photo is a start on funnels, The mastic tubes are only about 1mm small, so I think it will pass. I,mm not sure what colours to paint base of funnels but photo's I have show it to be a dark colour, Brown or black with silver or white base. Prentice.

Looking good, and a nice idea using the mastic tubes.
The funnel bases should be brown, and the chequer plate silver maybe this will help
Clark

Thanks for photo Clark, That's a great help. Lots more detail to go in but I think i,mm on the right track. Will post photo from same position in a week or two............. Prentice.

Here is a photo as promised. But Jeanie Deans is facing wrong way, oh dear. The other side is ok. Now to finish off the chimneys. Prentice.

Sorry ..Funnels. Prentice.

thats some very nice work.      you must be very pleased

Hi. Thanks for comments. The funnels painted, a few other details to wait for later. Prentice.

Hi Prentice,
Well almost one year on from your showing at paddler day last year she looks even more excitting!
Hope to see her at the show this year. If you can make it, would be good to see you too.
Regards,
Kim

Hi, Thanks, Yes I will be there only 325 miles or so from E Sussex. Prentice.

Hi All, Two more photo's, First at Puddleducks Rally, Fab day,Lots of very good models, And thanks to Ian for lending us his Tug Sterling to tow my Jeanie around the reservoir. 2nd shows a start made on the working lights for landing platform. Prentice.

Hi All.
Some of the landing platform and lounge table led lights finished.
Prentice.

beautiful work as always   

Have now started on the engine vents. Photo shows black plasticard forms from a 1 1/2 mm sheet held over a candle until soft then useing the shaped wood formers and pressed together quickly. then cut and trimmed. the idea is from others on Paddleducks, so thank you. It works well and now need to do other sizes. They are joined to wood dowelling and filler to blend. Painted and handgrips put on. Prentice.

Great idea, the wood formers! I just used a large bead (from a cheap plastic necklace) on the end of a screw, took five or six attempts to get two useable vents...

 Here is my 2nd attempt at the anchor winch which I think is more in keeping with looking right. Also a tryout of my stanchions with handrails..
When I have all the fittings made for the bow area I will pin them down.I need some (a lot) of rope next. Prentice.