Paddleducks

General => Introduce Yourself => Topic started by: Cyberdan on May 23, 2013, 03:38:53 AM

Title: New paddle boater with a Lulonga from Canada
Post by: Cyberdan on May 23, 2013, 03:38:53 AM
Hello,

I'm new to paddle boats albiet with some experience with scale boating in general. Today my new aquisition arrived and it is a partially built Lulonga  8), very unusual and interesting to me for sure.

I already downloaded its build article (thanks to the person who posted) but cannot locate the plans and I know they are not offered any longer, is there anyone here that can send me an electronic copy of them or even by mail and I'll pay for the copy and postage fees?

I'm hoping to start on it soon and will have many questions to tap into your collective experience, so my thanks in advance for your assistance.

Hany
Title: Re: New paddle boater with a Lulonga from Canada
Post by: jelley_baby on May 23, 2013, 06:03:27 PM
Hi Hany,

If you search for old Model Boat magazines from Dec 1994 January 1995 February 1995 and March 1995 then you will probably be able to get all that you need for a Lulonga the plan was given with the December Issue and a build log with the 1995 issues that followed. I have a Lulonga and they have helped me greatly.

I think that if you search this site the articles may be available to down load I will check an find the link, if they are not available I have PDF of the articles that I could Email to you, but the plan would be more of a problem, as it will not photograph very well, so I would search Ebay for a copy of the December 1995 Model Boat Magazine they often come up. Some photos of my model are in the Model Boat Web Site at:-

http://www.modelboats.co.uk/albums/member_album.asp?a=15684

Hope this helps and continue the Log

Graham (Wales GB)
Title: Re: New paddle boater with a Lulonga from Canada
Post by: Cyberdan on May 24, 2013, 12:18:18 AM
Thanks Graham,

Your tug looks great and a lot of detail pictures do help.
I have the pdf build article, I needed the plans for parts sizes rather than approximating them, also to replace pieces as needed. I was hoping for a scanned copy or print.

Thanks, again,
Hany
Title: Re: New paddle boater with a Lulonga from Canada
Post by: jelley_baby on May 24, 2013, 06:24:37 PM
Hi Hany,

Away from home for a while, will try and scan plan in sections and get back to you then.

Regards Graham (Wales GB)