Paddleducks
General => Introduce Yourself => Topic started by: ken-aus on September 10, 2012, 03:08:26 PM
-
ken-aus
new member
hi to all
from the land of aus. i am trying to build my first model boat, called the city of Munro
this project is an american rear paddle wheeler approx 1metre long
having a ball and learning from my many mistakes
regards
-
Hi Ken, welcome from the USA! You are going to hear a great deal about documenting your build with pictures on this site and possibly drawings. One thing I had trouble with immediately is posting pictures. There is an earlier post about uploading pictures which will show you a link that will straighten this out for you too. Everyone here is great and helpful above and beyond! Dont be afraid of making mistakes or getting advice in a very blunt fashion. Members dont do this to belittle anyone but educate and make us think (very well meaning lot here!). Once again, welcome and have a great time on this site!
-
Hi welcome from the uk. My dad used to say" the man who never made a mistake never made a thing" SO KEEP TRYING.
oldman
-
welcome aboard, Mark is right in that we do enjoy a good build log, but equally questions about how to, and generally anything paddler related.
on the picture front, i use photobucket and simply copy and past the image link into the post. including the [img] bits each end.
good luck with your stern-wheeler and remember we are all here to share our interest in padlers :beer