Paddleducks

Paddler Modelling => Construction => Topic started by: puffin on October 28, 2009, 03:32:27 AM

Title: Waverley Paint
Post by: puffin on October 28, 2009, 03:32:27 AM

Hi P D's
Just a quick question please, I'm currently building the Waverley and will soon be ready to paint the hull, should the paint be gloss, satin or matt ???, I hope to use Plasti-kote paint as I dont have spray facilities.
Many Thanks
Mike

Title: Re: Waverley Paint
Post by: Eddy Matthews on October 28, 2009, 04:01:42 AM

It's very much a personal choice Mike, but I prefer satin as I think it looks the most realistic....

Regards
Eddy

Title: Re: Waverley Paint
Post by: Tug--Kenny on October 28, 2009, 05:54:01 AM

Hi Puffin

I don't recommend Plasti- Kote paint. It's too thick and dries too fast.

The best for spray cans is the car paint. (probably from Halfords).

Start off with  'Red Oxide' and let it dry overnight. Then lightly sand over to smooth out the surface, then spray it again.

Wait until dry and then use Black Satin ( as Eddy suggests) for the lower hull. I have not seen White satin in my local store, so I used the whitest 'Car paint' I saw in the rack. (sorry but cannot remember which model car it was for). Believe me, there are more shades of white manufactured than there are snowflakes.   :D

Don't forget that when you mask off the change of colour line, to over-spray with the original colour and let it dry, before applying the new colour. (it prevents paint bleed under the tape).

Don't forget to photo the process and show us all how you're getting on.

Cheers

Ken