Paddleducks

Paddler Modelling => Kits & Hulls => Topic started by: djcf on June 01, 2009, 08:25:48 AM

Title: Metcalf mouldings "Albion" hull
Post by: djcf on June 01, 2009, 08:25:48 AM

Hi All,

P.S. Albion 1:48 hull

Does anyone know if this hull is still available?  I may be wrong but I seem to remember being told that Metcalf Mouldings were no more???

Hopefully not, I already have one of these hulls in storage, but want another for the distant future!!!

regards
Clark

Title: Re: Metcalf mouldings "Albion" hull
Post by: Talisman on June 01, 2009, 08:28:47 AM

Hi it's now being sold by Models by design

http://www.modelsbydesign.co.uk/model_boats.aspx

Title: Re: Metcalf mouldings "Albion" hull
Post by: djcf on June 01, 2009, 08:36:28 AM

Thanks for that, Kim, I will see about ordering one. As you will know, there are many possibilities for this hull....just need the time now!!

Clark

Title: Re: Metcalf mouldings "Albion" hull
Post by: kiwimodeller on June 01, 2009, 08:47:42 PM

They also have the Berry Castle hull and I corresponded with him about both. They could not provide any pictures of the hulls or of the full size prototypes but perhaps somebody can steer you to a picture or two on this site or on the net. Cheers, Ian.

Title: Re: Metcalf mouldings "Albion" hull
Post by: Talisman on June 01, 2009, 09:27:44 PM

If it helps..

http://www.xlistplans.demon.co.uk/Paddlers.htm

Drawn by Phil Thomas so should be  a good set of drawings.

Title: Re: Metcalf mouldings "Albion" hull
Post by: djcf on June 02, 2009, 07:06:37 AM

Cheers guys,
Yeah I have those drawings..been tentatively doing a bit of research..I'm half way through a non-paddler model, and want to finish her, but seeing so many nice photos on PDs recently of paddlers on the water...  ::)

Title: Re: Metcalf mouldings "Albion" hull
Post by: Talisman on June 02, 2009, 07:12:45 AM

Clark i was just reading an earlier post re making a Kylemore on the Albion hull.
Off the top of my head i can't help as to wether the hull is correct or not but i know a man that does and has a very nice model of Kylemore.
If it's of interest let me know and i can get some pics

Title: Re: Metcalf mouldings "Albion" hull
Post by: djcf on June 04, 2009, 06:46:33 AM

Hi Kim,
That would be interesting if you could get a hold of the Kylemore photos...she could be on the agenda...

Basic hull dimensions 200' long 25' (I think, - of the top of my head) broad, for Albion.

I intended to make Glen Rosa but I've seen a few about, fancy something different

looked at a few paddlers with similar dimensions & its down to Kylemore (or Strathmore), & Marchioness of Lorne 1891. I am ordering plans for both of these from Glasgow Uni Archives / Ballast trust, just waiting on them getting back to me.

I like both of the above, and I think the Albion hull (with modification) would do both, thats why I was looking for another Metcalf hull & do a dual build hopefully!!!

Clark