Paddleducks

Paddler Modelling => Construction => Topic started by: pete on April 20, 2009, 09:09:40 PM

Title: Talisman build
Post by: pete on April 20, 2009, 09:09:40 PM
Finally found some time to download some pictures of the build to 'My Gallery'.
More to follow when I get the chance!
Title: Re: Talisman build
Post by: granath on April 20, 2009, 10:23:25 PM
Very nice build! amazing work there! keep the image's coming please! :o ::)

what is the size of the hull? did you mold the glassfibre hull you're self or did you buy It?
Title: Re: Talisman build
Post by: pete on April 21, 2009, 01:50:26 AM
I built a f/glass hull for the Waverley, - the last model I built back in 1991.
It took about 6 months to make a plaster model and then a 2 piece female mould from which to take the final moulding. This time I've used a hull from Models by Design.
It is in the region of 54 inches long. I'll put a picture of the Waverley modeln in the gallery.
Title: Re: Talisman build
Post by: mjt60a on April 21, 2009, 05:10:48 AM
That's looking great, and very 'professionally' built - makes my method look a total bodge-job!
Title: Re: Talisman build
Post by: Talisman on April 21, 2009, 06:31:31 AM
It is a very nice build hope to see some more pics of progress soon.
A nice looking Waverly you have made. Did you keep your mold for the Waverly would you be interested in casting a hull :) ?
Title: Re: Talisman build
Post by: pete on April 21, 2009, 05:41:26 PM
Re the mould for the Waverley, I'm afraid I had to leave that abroad when I flew home.
The model itself was sold to a Scottish gentleman who had vivid memories of sailing on the Waverley as a child.
Title: Re: Talisman build
Post by: pete on October 03, 2009, 02:07:12 AM
Not a lot of progress this summer, due to family weddings, births etc.
However, tests of the propulsion, ballast and r/c have been completed and I have uploaded a few more photos to 'My Gallery'.
Has anyone got a recommendation for a suitable smoke unit to replicate the diesel exhaust for this vessel?
Title: Re: Talisman build
Post by: Talisman on October 04, 2009, 07:19:44 AM
She's looking good!
Not to sure what smoke unit i would recommend for a diesel - maybe one of the Graupner units?
or make your own?
Regards,
Kim
Title: Re: Talisman build
Post by: pete on November 10, 2009, 09:15:32 PM
Took your advice Kim and made my own. Picture of bench-test in the gallery.
Used a Maplins mini-fogger, a computer fan and a voltage step unit to give 24vdc from 12vdc. Draws 1.1 amps. Tank is suspended from fwd superstructure. Re-filling is down the funnel!

(http://www.paddleducks.co.uk/smf/gallery/3/1206_10_11_09_10_09_14.jpeg)
Title: Re: Talisman build
Post by: Tug--Kenny on November 11, 2009, 01:08:38 AM
Quote from: pete on November 10, 2009, 09:15:32 PM
Took your advice Kim and made my own. Picture of bench-test in the gallery.
Used a Maplins mini-fogger, a computer fan and a voltage step unit to give 24vdc from 12vdc. Draws 1.1 amps. Tank is suspended from fwd superstructure. Re-filling is down the funnel!


Hi Pete.

I, also have been experimenting with the Maplins foggers. I've found the best voltage to operate it was 28volts DC. There was much more smoke than the 24 volts and it seems to run the oscillator quite happily.

That aside, in an effort to eliminate a second battery, could you advise me on the voltage step up unit please.

Cheers

ken

Title: Re: Talisman build
Post by: pete on November 11, 2009, 03:29:27 AM
Hi Ken
The step-up unit is designed for fitting to a car fag lighter to power up to a 24v laptop.
'Quasar Electronics have it on their website, - ser no is CVA117
Technical Specifications
Power supply 11-14Vdc, 8 Amps Max.
Output voltage 15/16/18/19/20/22/24Vdc
Maximum current (Amps) @
Specified Output Voltages
 3.3A @15/16Vdc output
2.6A @ 18/19Vdc output
1.5A @ 20Vdc output
1.3A @ 22/24Vdc output
Dimensions 57 x 88 x 27mm
Weight 240g

Got mine on ebay from 'Envirolite'
Title: Re: Talisman build
Post by: Tug--Kenny on November 12, 2009, 01:03:41 AM

Thanks Pete. I'll look into it

Ken