Paddleducks

Other Marine Models => Live steam => Topic started by: derekwarner_decoy on November 05, 2006, 12:53:22 PM

Title: GAZ Refil Adaptor
Post by: derekwarner_decoy on November 05, 2006, 12:53:22 PM

Hi PD's..... by the grace  :bow of [BIX Engines UK] I have ended up with a second GAZ adaptor for the disposable EN416 cannisters to the ACS style refillable  :boom GAZ a tanck

ACS Part Number 'REGAS-ADPT' & sells for ten Pounds UK, however I have no use for a second adaptor & will post it to NO CHARGE any PD seriously considering steam

[an OZ paddler could have first choice Peter W]

[or Jim {RED}...............if Susan can buy diamonds why don't you call ACS & get an ETA of a boiler & engine  :gift  package]  :hehe  :music  :great - Derek

Title: GAZ Refil Adaptor
Post by: steamboatmodel on November 05, 2006, 03:05:59 PM

Hi Derek,
If nobody in OZ wants it can I put a bid in for it?
Regards,
Gerald

Title: GAZ Refil Adaptor
Post by: derekwarner_decoy on November 05, 2006, 03:35:20 PM

Hi PD's - Gerald, there is no BID required...... from our PD Member list, find me ...derekwarner_decoy....& e-mail your postal address & I will post forward it on to you

'It', the spare 'GAZ :boom  adaptor' should go to a good home & your posts  :respect2 in steam issues most certainly qualify you & you are the first to respond

regards  Derek  :D

Oh BTW.....how is your boiler modification progressing :?: - we would all like to seeeeeeeeee more BOILERS  :arrow:

Title: BTW...boiler modification
Post by: steamboatmodel on November 06, 2006, 01:55:47 AM

Work on the Boilers has slowed down a bit  :cry: due to other commitments and health problems, but I am hoping to get back to work on the Scott boiler soon. I have the main drum cut and the end caps flanged, now I have to make a tube bender to get the proper radius on the 17 cross tubes. When I get them done I will post some shots before I start soldering it up.
Regards,
Gerald

Title: GAZ adaptor
Post by: steamboatmodel on November 22, 2006, 05:34:10 AM

Hi Derek
The GAZ adaptor arrived this morning :great , thank you very very much :respect  :respect . I very carefully opened the package and then rushed down to the Dungeon (workshop) to test it out, leaving my :coffee at the  :computer which caused my Daughter to ask if I was OK :hehe . The adapter works  :terrific  :yeah and maybe this will give me some incentive to find my round tuit and get some work done on my models.
Regards
Gerald

Title: GAZ Refil Adaptor
Post by: derekwarner_decoy on November 25, 2006, 01:18:25 AM

Hi PD's - Gerald... you should read this site

http://translate.google.com/translate?hl=en&sl=fr&u=http://perso.wanadoo.fr/daniel.brouard/&prev=/search%3Fq%3Dhttp://perso.wanadoo.fr/daniel.brouard%26hl%3Den%26lr%3D%26sa%3DG

Brillant French artisan & builder..... the engines & the boilers  :bow

regards Derek  :)

Title: GAZ Refil Adaptor
Post by: steamboatmodel on November 25, 2006, 02:57:58 AM

Hi Derek,
I tried, but got "page not found" :(
Regards,
Gerald

Title: GAZ Refil Adaptor
Post by: Barrie on November 25, 2006, 04:58:41 AM

This will get you to the page - in French. If you wish to translate it, look for Google's Translation Services on the Google homepage, and paste the URL into the box provided. Should work - haven't actually tried it with this site, but works for others!

Barrie

http://perso.wanadoo.fr/daniel.brouard/

Title: GAZ Refil Adaptor
Post by: steamboatmodel on November 25, 2006, 02:31:32 PM

After 3 or 4 tries  :rant I finally got google to load and translate it :yeah , I should have covered the keyboard :oops as I had to dry if off :music after going through the site  :respect  :respect that is some very nice looking parts :trophy . thanks for posting it :respect
Regards,
Gerald :sunglasses