Paddleducks
Other Marine Models => Live steam => Topic started by: derekwarner_decoy on July 18, 2006, 10:24:39 AM
-
Hi PD's - I note on the JMC WEB site attached to our PD's, that the manufacturer has added a true triple expansion 8x12x17 diameter by 12 stroke vertical engine which runs at the needed higher pressure of 8 Bar :roll:
However of equal interest is glass tubed tie rod style lubricatior where we can clearly see the three distinct layers of fluid .... oil on top .. followed by a sandwich of water/oil in immulsion.. then to clear water with just a mist of oil suspended on the ID of the glass :idea:
So from this I can only conclude the engine has been run & commissioned 8) - Derek