Paddleducks

Paddler Modelling => Paddlewheels/Drive Systems => Topic started by: Eddy Matthews on October 27, 2005, 06:50:34 AM

Title: Suter sternwheeler
Post by: Eddy Matthews on October 27, 2005, 06:50:34 AM: I just wanted to say a quick "thankyou" to Mick Thomas (mjt60a). I asked him a few weeks ago if he'd be prepared to build me another paddlewheel for the Suter as I wasn't happy with the one I'd made... He immediately said yes, and the said wheel arrived in the post today - To say I'm over the moon is a total understatement!

It's absolutely superb Mick and I'm delighted with it!
Title: Suter sternwheeler
Post by: thewharfonline on October 27, 2005, 07:06:35 PM: Mick is wonderful when it comes to wheels! My custom made half wheels for my Alexander Arbuthnot which Mum recevied (because I was on work experience) are brilliant...and Mum was amazed too. I haven't constructed them yet (no time....exams YAY :( ) but I've done a kind of dry run and they fit a dream.

Mick sorry that my present for you is running late...my whole idea is that I'll take some photos of the wheels constructed and add that in along with the "special thing from Echuca (no it's not the Hero)" and then I'll whack it in the post and send it...so it's coming!

Thanks Mick...I'm sure anyone that receives your wonderous wheels will be really happy with the results!
Title: Suter sternwheeler
Post by: mjt60a on October 28, 2005, 07:24:11 AM: Thanks for all the praise guys, sometimes I have to remind myself how I didn't have a clue about how to make them six months ago (until I got the copy of 'Model Boats' magazine with the article on building the Tipstaff - and especially how the wheels were made!) I have to make some more for a 'future' project that I probably mentioned before so I'll also make some more ebay ones while I'm at it :)
Title: Suter sternwheeler
Post by: Eddy Matthews on November 06, 2005, 05:42:30 AM: Here's a couple of photos of the new sternwheel Mick made for my model of the "Suter". I hope to spend some time next week doing a bit of work on her, so with a bit of luck I'll have some more photos soon to show some progress!
Title: Suter sternwheeler
Post by: PJ on November 06, 2005, 05:47:12 AM: Wohhhh...now THAT is impressive...Mick how bout a masterclass on building these things?

Quote
----- Original Message -----
From: Eddy Matthews (paddlewheels@paddleducks.co.uk)
To: paddlewheels@paddleducks.co.uk (paddlewheels@paddleducks.co.uk)
Sent: Saturday, November 05, 2005 10:42 AM
Subject: RE: Suter sternwheeler

Here's a couple of photos of the new sternwheel Mick made for my model of the "Suter". I hope to spend some time next week doing a bit of work on her, so with a bit of luck I'll have some more photos soon to show some progress!

Regards
Eddy

-------------------- m2f --------------------

Exported by Paddleducks Mail System.

http://www.paddleducks.co.uk/forum/viewtopic.php?p=5851#5851 (http://www.paddleducks.co.uk/forum/viewtopic.php?p=5851#5851)

-------------------- m2f --------------------
Title: Suter sternwheeler
Post by: gbritnell on November 06, 2005, 06:33:51 AM: That's a very nice looking paddlewheel and the bearing blocks look very good also.
George
Title: Suter sternwheeler
Post by: Eddy Matthews on November 06, 2005, 06:36:59 AM: Quote from: "gbritnell"
That's a very nice looking paddlewheel and the bearing blocks look very good also.
George

Whilst I can't lay claim to making the paddlewheel, I did make the bearing blocks! :-)
Title: Suter sternwheeler
Post by: thewharfonline on November 06, 2005, 11:31:04 AM: I finally constructed my wheels too...ooooooooo shivers up the spine, they're really good! photos will first go to Mick though before anyone else gets to see them...I think that's fair.
Title: Suter sternwheeler
Post by: mjt60a on November 07, 2005, 10:21:10 AM: Quote from: "thewharfonline"
...photos will first go to Mick though before anyone else gets to see them...I think that's fair.

That's OK you may as well post them here, I'll see them soon enough :)