Forum > Paddlewheels/Drive Systems

Sternwheel drive

(1/1)

towboatjoe:
For modelers interested in how I got the pitman arms to push back and forth on the Verity like the prototype, I have photos and a drawing of the mechanism i built from brass tubing at the following page.....
http://www.dragg.net/jbrown/construc2.htm

mjt60a:
That's a very interesting page! I've used some of those things myself but there's still a lot of suggestions I can try :)
ps. the blister-pack that my hay fever tablets are supplied in make good 25th scale bulkhead lights if I add four loops of thin wire, two vertical then 2 horozontal (and can contain a small white LED!) and I've found that the plunger from an insulin syringe is just the right diameter to force lubricant into a propshaft.....right now I'm looking for some discarded lengths of a broken GRP fishing rod to make scale (but not fragile) masts...

Walter Snowdon:
Hi Joe, Thats one of the best articles I have seen posted anywhere.A load of very practical ideas. Wishing you more strength to your arm for future gems ( I will raise a glass (or two) to you tonight) .Cheers, Walter.

Navigation

[0] Message Index